SGB high gradient flat plate magnetic separator

GPBS series of high gradient plate magnetic separator alias plate magnetic separator, is our company's new research and development of high gradient, high field intensity magnetic separation equipment, mainly suitable for wet processing of non-metallic ore iron purification, especially quartz, feldspar, nepheline ore, kaolin iron purification. It can also be used in the wet separation of hematite, limonite, siderite, manganese ore, ilmenite, wolstenite and other weak magnetic metal ores and the separation of black and white tungsten, black tungsten and cassiterite.

product details

Working principle

The pulp enters the uniform feeding device of the magnetic separator through the feeding pipe, and after being fully dispersed, it is evenly sprinkled on the iron strip on the upper part of the magnetic plate. Under the action of gravity, the slurry flows downward along the inclined direction of the magnetic plate. The ferromagnetic material contained in the slurry is firmly adsorbed on the iron strip under the strong magnetic field provided by the magnetic bar. The motor rotation device drives the iron strip to move upward along the inclined direction of the magnetic plate, and at the same time, the adsorbed ferromagnetic material is brought into the iron discharge area. The flushing water of the iron discharge pipe is flushed into the tailings bucket and collected centrally. The non-magnetic slurry continues to flow downward along the magnetic plate and flows into the concentrate bucket and is collected centrally.

Type	Material handling capacity t/h	Magnetic field intensity≥GS	Pulp density	Tape speed r/min	Power kw	Plate size
Type	Material handling capacity t/h	Magnetic field intensity≥GS	Pulp density	Tape speed r/min	Power kw	Length	Width	Bandwidth
GPBS-815	10~15	14000	10~30%	2~8	1.1	1500	800	800
GPBS-1020	15~20				1.5	2000	1000	1000
GPBS-1225	20~25				2.2	1200	1200	1200
GPBS-1530	25~30				3	1500	1500	1500
GPBS-2035	30~35				4	2000	2000	2000
GPBS-2240	35~40				5.5	2200	2200	2200

SGB high gradient flat plate magnetic separator (6)yin

Application field

It is mainly suitable for the ore separation of weak magnetic minerals and the removal of iron from non-metallic minerals, such as: mica powder, quartz sand, potassium feldspar, nepheline, fluorite, sillimanite, spodumene, kaolin, manganese ore, weak magnetite, pyrrhotite, calcined ore, ilmenite, hematite, limonite, siderite, ilmenite, chromite, wolstenite, tantalum niobite, red mud, etc. It can also be used for iron removal in coal, non-metallic mines, building materials and other industries. [Add to the application field and applicable materials of high intensity magnetic separator for non-metallic mining]

SGB high gradient flat plate magnetic separator (5)ulg

Technical characteristics

1. Using high-performance NdFeb material, unique magnetic circuit design, surface magnetic field can reach 15000GS.

2. Compared with other permanent magnet magnetic separator, the magnetic field sweep area is large, and the iron removal effect is good.

3. The slope of the board is adjustable, and the slope can be adjusted according to the material condition to achieve a good iron removal effect.

4. The belt speed can be adjusted by frequency conversion, and the belt speed can be adjusted according to the material shape to achieve better iron removal effect.

5. The use of wear-resistant canvas as a conveyor belt greatly increases the service life of the conveyor belt.

6. Save electricity and energy.