Magnetic Separator Selection Guide

1、According to the characteristics of different stages of the ore dressing process, different types of equipment are used.

2、For the ore with more waste rock after rough crushing, we can directly use the permanent magnetic roller as the driving wheel of belt conveyor to achieve the rough material tailing.

3、Following the principle of "more crushing and less grinding", for the ore crushed to finer particles can be based on the nature of the ore, before entering the ball mill to implement dry pre-sorting or wet pre-sorting in order to improve the efficiency of the ball mill.

4, after ball milling and classification of the ore generally should be first through the higher field strength magnetic separator for roughing, a large number of magnetic iron ore recycling plus come, and then through the selector magnetic separation to achieve qualified concentrate grade requirements.

5, in order to prevent the large metal impurities mixed into the ore to damage the crusher, generally should be added before the crusher metal detection and selection equipment.

6、According to the nature of the customer's ore for the analysis of samples, to determine the beneficiation process and equipment.

Strong magnetic field eddy current sorter selection guide:

Strong magnetic field eddy current sorter has good sorting effect on many kinds of non ferrous metals, can effectively implement automatic separation of non metals and non ferrous metals, reduce labour force, high efficiency recovery of metals, effectively increase the output value and reduce the waste of resources, the product is mainly used for:

Recovering non-ferrous metals from crushed materials in car-wrecking factories;

Recovering copper and aluminium from aluminium-copper casting sand and smelting ash;

Collecting aluminium bottle caps from glass bottles, plastic bottles, sorting aluminium wires and lead alloy parts;

Recovery of non-ferrous metals from municipal solid waste materials;

Recovery of precious metals from incinerated circuit boards;

Collecting non-ferrous metals and weak magnetic materials from large crushed materials such as old cars and old home appliances.

Different sorting machine models should be selected for different working conditions, and the following points should be considered for selection when using this equipment:

1. The materials entering the machine should be evenly spread on the sorting belt, and it is good to choose the vibrating feeder.

2. The volume of materials entering the equipment should be 5mm ³-120 mm ³ above the metal will have a significant separation effect, this time should choose concentric strong magnetic field eddy current sorting machine.

3. If the volume of the material entering the equipment is 3mm³-5 mm³ below the metal should choose eccentric strong magnetic field eddy current sorting machine, the equipment has a good discernment of fine particles and sensing ability.

4. Selection of eddy current sorting equipment should consider the content of iron impurities in the material, the content of more should be in the eddy current sorting machine before the addition of magnetic separation equipment, according to the site selection of suitable magnetic separation equipment (recommended use of the iron remover or magnetic drum) and the appropriate field strength of the magnetic separation equipment, in order to avoid the service life of the eddy current sorting equipment caused by the drop.

5. According to the volume and density of the material to be selected to estimate the processing capacity to be sorted, and the volume of the material to choose the appropriate sorting machine HTECS Concentric Strong Magnetic Field Eddy Current Sorting Machine Series.